The zinc oxide arrester tester is a relatively advanced equipment, which has more functions. When you use the zinc oxide arrester tester, you need to be proficient in its operation method. Today I will give you a specific introduction How to operate the zinc oxide arrester tester.

1. When using the zinc oxide arrester tester, the date and time can be set. During operation, you only need to select the function key to adjust, select the year, month, or hour, minutes, and seconds to be adjusted, and then use the decrease or increase keys to adjust. After the adjustment is complete, You can press the OK button.

2. The zinc oxide arrester tester has many switching modes, generally there are three, such as wireless mode, induction mode and wired mode. The three can be switched. You only need to press Just press the OK button, and the device will switch automatically.

3. The zinc oxide arrester tester also has the function of checking. It is enough to point the cursor of the function key to view, and then use the decrease, increase or function keys to select the data to be viewed, and then press the OK key to display the data.

4. To measure the zinc oxide arrester tester, you need to point the cursor to the measurement button, and then press the OK button, so that the zinc oxide arrester tester can perform the measurement, and the measurement screen will appear next. The zinc oxide arrester tester can also be printed. You can print out the measured data, but it has no storage function.