HuaTianLogo
Zinc Oxide Arrester Characteristic Tester

HTYB-3H Zinc Oxide Arrester Tester

Measurement and Analysis of Leakage Current for Zinc Oxide [MOA]

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

This instrument is used for the measurement and analysis of zinc oxide [MOA] leakage current. It is mainly used to measure resistive currents to analyze the extent of zinc oxide aging and moisture. The on-site live test conforms to the requirements of the People's Republic of China power industry standard "DL474.5-92 Field Insulation Test Implementation Guide - Arrester Test". It can also be used in laboratories for factory and acceptance tests.

Product nickname: Zinc oxide arrester tester, Intelligent arrester characteristic tester, Anti-jamming Zinc Oxide Arrester Characteristic Tester, Arrester resistive leakage current detector, Zinc oxide arrester live tester, AC gapless zinc oxide arrester tester, Zinc Oxide Arrester Characteristic Tester

Product Parameters

Technical Parameters

Reference voltage input range (peak) 10V ~ 200V, can be customized (0-250V)
Full leakage current Measuring range (peak) 100uA ~ 8mA, can be customized (0-20mA)
Resistive current Measuring range (peak) 100uA ~ 8mA, can be customized (0-20mA)
Capacitive current Measuring range (peak) 100uA ~ 8mA, can be customized (0-20mA)
Angle Measuring range 0°~90°
Power 4W
System measurement accuracy ± (reading × 5% + 5 words) (harmonic current is not more than 2 mA)
AC power supply AC220V ±10%,50Hz ±1%
Note:

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Wuhan UHV, please enter product center . Service email:info@hvtest.cc

Product Characteristics

Product Picture

Product attachment diagram

Product detail map

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

Recommended Products