HuaTianLogo
Cable Fault Teater

HTDS-V Live Cable Identification Instrument

A special instrument used to identify a particular cable from a bundle of cables

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

HDS -V live cable identification device (hereinafter referred to as the identification device) is a special instrument used to identify a particular cable from a bundle of cables. It can recognize both power cut cable and live cable, which meets the multiple requirements of cable identification in power construction site.

The identification instrument is mainly composed of transmitting host, receiving host, transmitting line, transmitting caliper and flexible measuring coil. The design of the identification device is more compact and portable than the previous generation of products.

Product Names:live cable identification instrument, live cable identification instrument tester, cable identification instrument

Product Parameters

Launch the host

Charging voltage DC5V
Power consumption ≤ 3W
Work hours ≥ 12h
Signal interval ≈ 2 seconds
Launch caliper inner diameter ≥ 125mm
Environment temperature -35℃ ~ +55℃
Environmental humidity ≤ 95%RH

Receiving host

Charging voltage DC5V
Power consumption ≤ 1W
Identify ways direction, amplitude, interval, triple judgment basis
Reception sensitivity power - ground circuit resistance≤500Ω
live - ground circuit resistance≤200Ω
Work hours ≥ 12h
Environment temperature -35℃ ~ +55℃
Environmental humidity ≤ 95%RH

Appearance of size

Case 520mm×350mm×170mm
Note:

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Huatian products, please enter Product center . Service email:qiao@hvtest.cc

Product Characteristics

Product Picture

Product attachment drawing

Product details

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T28001-2011 occupational health and safety management system requirements.

Recommended Products