Detection Technology
How to Choose a Primary Current Injection Test Set
In the verification of substation relay protection, temperature rise test of switchgear, and transformation ratio test of current transformers, the primary current injection tester undertakes the core task of simulating real working conditions. However, many units habitually use "maximum output current" as the primary or even the only indicator when purchasing, only to discover after the equipment arrives that the current ripple is too large, causing measurement data distortion, triggering overheating protection after half an hour of continuous operation, making on-site wiring cumbersome, and debugging time-consuming far beyond expectations.
The first principle of selection is not that the larger the current, the better, but that matching is the most important, "said the technical staff of Wuhan UHV Power Technology Co., Ltd. This judgment comes for the company's years of on-site experience in the field of power testing equipment.
Step 1: Set the scene first, then set the parameters
The requirements for equipment vary significantly in different testing scenarios. The verification of relay protection devices requires high precision, wide adjustable range, and fast response capability; The temperature rise test of the switchgear requires the equipment to have a continuous and stable output capability of more than 8 hours, and the current fluctuation must be controlled within a very small range; However, laboratory short-circuit simulation scenarios place greater emphasis on instantaneous high current surge capability and sensitive protection mechanisms.
The product line of Wuhan UHV covers a full range of high current testing solutions hundreds of amps to tens of thousands of amps, supporting customized configuration according to the actual type of test object of the user. The company's DDG series primary current injection tester is suitable for current load testing and temperature rise testing of various types of circuit breakers, switchgear, current transformers, and voltage transformers.
Step 2: Look at the "truth" behind the parameters
The nominal value of the output current is only the starting point. The stability and ripple coefficient of the current output truly determine the quality of the test data. Industry technical specifications usually require that the maximum output current of the testing equipment should exceed 20% to 30% of the rated current of the tested equipment, and the measurement accuracy should be controlled within ± 1% of the full range. In terms of ripple control, high-quality equipment should have a current ripple level of no more than 1.5%, otherwise measurement errors will directly affect the judgment of equipment status.
The ability to control temperature rise is also a hard threshold for selection. Long term operation of high current equipment can generate considerable heat, and equipment with efficient heat dissipation design can continue to operate stably within the allowed working cycle without derating. Wuhan UHV products adopt corresponding heat dissipation strategies according to different current levels, such as forced air cooling systems, to ensure the continuous output capability of the equipment within the rated time.
Electromagnetic compatibility (EMC) is often overlooked, but in strong electromagnetic environments such as substations, the anti-interference ability of equipment directly determines the stability of readings. The related products of Wuhan UHV have passed the national EMC certification and can still maintain precise output in complex electromagnetic environments.
Step 3: Give equal importance to intelligence and security
Modern primary current injection testers are no longer simple devices that generate heat when powered on. The touch screen graphical interface, preset test templates, automatic data recording, and report generation functions are becoming key configurations to improve on-site work efficiency. Some devices also support remote monitoring function, which enables remote start stop and status viewing through wireless connection, especially suitable for operations in high-risk areas.
In terms of safety protection, overcurrent, overload, timing and other protection functions should be included as standard. When there is an abnormality in the test circuit or the preset time is reached, the system needs to automatically return to zero and cut off the output, while giving a clear prompt. In terms of component selection, industrial grade solid-state switches have a longer service life and faster response speed compared to ordinary relays, and have obvious advantages in frequent start stop testing scenarios.
Step 4: Structural Design and Long term Reliability
The service life of a large current testing equipment is usually 5 to 10 years, and the structural design directly affects the reliability of long-term operation. The all metal chassis, aviation grade wiring terminals, modular component layout, and lightweight design that facilitates single person mobility are all important factors that affect user experience in practical use. According to feedback multiple provincial-level electric power research institutes, the high current device of Wuhan UHV has good temperature rise control during continuous operation for 8 hours, without any alarms or derating situations.
In the primary current injection test of large transformers, Wuhan UHV also provides a technical solution based on capacitor compensation. By using series capacitors to offset some of the inductive reactance and reduce the impedance of the test circuit, the required high current injection can be achieved under low capacity test power supply conditions. This method has been practically verified in the load simulation vector inspection of a 1000kV ultra-high voltage substation.
System delivery capability is more important than a single device
The difficulty of the temperature rise test lies in the current stiffness - whether the power supply can still pin the current when the load impedance changes with temperature. The technical solution of Wuhan UHV focuses more on system delivery, covering bus distribution, thermal management, data acquisition time and temperature axis alignment on the low-voltage high current side, and clarifying the thermal stability criteria to users during on-site debugging. The company has obtained multiple qualifications such as high-tech enterprise certificate and ISO9001 three system certification, and has joined the China Electricity Council as a member unit.
The selection of a primary current injection tester is essentially about finding the optimal solution that matches actual needs between output capability, control accuracy, safety protection, and ease of use. The series products of Wuhan UHV Power Technology Co., Ltd. provide multi-level selection single equipment to system solutions for different voltage levels and testing scenarios.
Choose a Relay Tester for Overcurrent Protection | 2026/9/28 | reading377time How to Choose a Three-Phase Relay Test Kit | 2026/9/23 | reading363time return


