1. Gas protection

Gas protection refers to the protection that the protected transformer will directly trip when the dry-type transformer has an internal short circuit (including inter-turn short circuit), but the short-circuit current does not reach the current protection setting. It belongs to the main protection of dry-type transformers and cannot be removed during normal operation. Transformers are classified into light and heavy conditions according to the operating pressure of the Buchholz relay. Heavy gas acts on tripping, and light gas can act on tripping or signals according to the situation.

2. Temperature protection

That is, the temperature of the winding is measured by the temperature controller, and the over-temperature alarm and over-temperature trip signals are sent out according to the pre-set. Dry-type transformers are generally equipped with two levels of temperature protection: low temperature alarm and high temperature trip. The specific temperature value can be set according to Follow the instructions of the transformer manufacturer.

3. Indoor protection of dry-type transformers

We need to prevent small animals such as rats and snakes from entering. Generally, these animals entering the transformer will cause short circuits and even higher risks. So we can use IP20 protective protective shell for protection.

4. Outdoor protection of dry-type transformers

The main purpose is to prevent the entry of rainwater. In the case of the protective case, we also need to adjust the angle of the transformer to prevent water from entering. But now there are professional outdoor protective enclosures. In the specific protection work, we must make judgments based on the different environments, and we should try to avoid harsh environments to avoid reducing the performance of the transformer.