Transformer, transformer, induction voltage test special transformer
The Triple frequency transformer produced by Wuhan UHV is based on the Chinese standard "GB311-61" and the "Precautionary Test Procedure for Electrical Equipment" issued by the former Ministry of Water and Power in January 1985, in order to meet the voltage-frequency induction voltage withstand test of the high-voltage transformer of the power system. Designed for the requirements of the equipment, it is widely used in the AC withstand voltage test of the 35-220kV class string-type voltage transformer of the power system to evaluate the main transformer, from the insulation strength, and also to the winding of the motor and the small transformer. Induction test; can also be used as a short-time 150Hz power supply.
Product nickname：Triple frequency generator, induced voltage triple frequency generator, triple frequency power supply generator, test triple frequency transformer device, triple frequency induction withstand voltage generator, triple frequency test transformer, triple frequency tester, three Frequency doubling induction voltage tester, voltage transformer frequency doubling AC voltage tester, Triple frequency transformer
|Input voltage||three-phase 380V 50Hz sine wave|
|Output voltage||single phase 0~500V/0~1000V(continuously adjustable) frequency :150Hz|
|No-load running time||≤5 minutes|
|Load running time||40 seconds|
1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.
1, the company's Triple frequency transformer is simple to operate, reliable performance
2, can well meet the needs of transformers, transformers withstand voltage
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.