The filtration efficiency of the mask against staphylococcus aureus aerosol with average particle diameter of (3±0.3) m was not less than 95%
Note:
Regarding product purchase, technical maintenance and other services, welcome to send email:
Alex power according to the needs of customers, for professional development and design the mask production non - woven fabric high voltage electrostatic generator system, the sustainable production of high voltage electrostatic equipment, main effect is to mask non-woven melt-blown electrostatic, make masks on average particle diameter of (3 + / - 0.3) microns of staphylococcus aureus aerosol filtration efficiency of not less than 95%.Non - woven fabric high voltage electrostatic generator system plays an indispensable role in masks production line.
Principle of melting spray filter.The main material of melt-spray non-woven cloth is polypropylene, which is a kind of ultra-fine electrostatic fiber cloth, which can capture dust.The droplets containing pneumonia virus will be adsorbed on the surface of the non-woven cloth by static electricity when they are close to the melt-sprayed non-woven cloth and cannot pass through.That's how the material keeps out germs.After the dust is captured by the ultrafine electrostatic fiber, it is very difficult to be separated from the cleaning, and washing will also be destroyed the ability of electrostatic dust collection.So the mask can only be used once.
Melt-sprayed nonwoven fabrics require the addition of a trace substance called an electret, which is prone to static electricity. The nonwoven fabric can be charged for a long time by performing a "corona discharge" on it via an electrostatic electret device.
Electret processing.Electret refers to the dielectric material with the function of long-term charge storage. It has the advantages of high efficiency, low flow resistance, antibacterial, energy saving, etc. Besides ensuring the physical collision barrier effect of conventional filter material, it increases the electrostatic adsorption effect.In treatment makes the fiber filter material with charge, combining with the characteristics of melt-blown superfine fiber density, therefore charged fibers formed a large number of electrodes, charged fiber can not only like a magnet to attract environment most of the charged particle, at the same time, it can be not part of the charged particle polarization, and some of the smaller particle size of pollutants, even the virus the nanoscale material can also be for electrostatic adsorption or charge repel cut off.
The product names:non-woven fabric high voltage electrostatic generator system、Melting and spraying cloth electrostatic electret equipment, non-woven high voltage electrostatic generator, mask electrostatic generator, melting and spraying cloth electrostatic generator, electrostatic generator
specifications | 60/2 |
rated voltage | 60kV |
Rated current | 2mA |
Rated power | 120W |
whole machine quality | 9kg |
whole machine volume | 465*390*190mm3 |
Double the height of the barrel | 440mm |
Output voltage accuracy | ±(1.0% reading ±2 words) |
Accuracy of output current | ±(1.0% reading ±2 words) |
Ripple coefficient | ≤0.5% |
Way to work | Intermittent operation, rated load 30 minutes |
Overload capacity | no-load voltage can exceed the rated voltage by 10% for 10 minutes |
The maximum charging current is 1.25 times the rated current | |
Power supply:AC220V±10% 50Hz | |
Work environment | Temperature:-10-40℃ |
Relative humidity: no more than 85% at room temperature of 25℃ (no condensation) | |
Altitude: below 1500 meters |
1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.
2. For more information about Wuhan UHV, please enter product center . Service email:info@hvtest.cc
1、The instrument has high safety and comprehensive protection.
2、The instrument has good electrical performance, strong moisture resistance, no leakage, good performance and high precision.
3、The instrument can attach static electricity to the raw material of the mask, so that the filtration efficiency of the mask against the staphylococcus aureus aerosol with the average particle diameter of (3±0.3) m is not less than 95%.
4、Adopt special high-voltage power supply, digital control mode, all abnormal slow start, nanosecond arc pull response ability, ensure the melting and injection production line no fault, all-day operation.
5、Small energy storage, discharge ignition will not cause damage to non-woven fabric;Nanosecond pull-arc response capability ensures fast restart of power supply within 20ms to ensure uniform electrification effect.High stability makes the ionization effect more stable.
6、It has the advantages of high efficiency, low flow resistance, antibacterial, energy saving and so on. On the basis of ensuring the physical collision barrier effect of conventional filter material, it increases the electrostatic adsorption effect.
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email: info@hvtest.cc
Skype: Tina Qiao
+8615172408058