New test equipment for cable field inspection and condition diagnosis
Implementation standards: DL/T 1576, IEC 60270
Note: Regarding product purchase, technical maintenance and other services, welcome to send email: send email
UHV-505 damped oscillation wave state detection system is a new type of test equipment used for cable field detection and state diagnosis. It has the characteristics of simple and practical, small size, easy transportation, non-destructive test for cable under AC voltage condition, and diversified means of insulation performance detection and evaluation. The combination of Damped AC Voltage (DAC) withstand voltage test and local discharge test provides an effective means for discovering potential defects in cable insulation. In addition, the condition evaluation of insulation aging degree of power cable can be further realized with the help of dielectric loss field measurement technology.
The damped AC voltage generated by the system in the test process can reach up to 30kV, and combined with advanced system hardware and system software for diagnosis, the new version of the software can upload the test data to the cloud under the condition of network, in order to facilitate remote data analysis.
The product names:Oscillating wave detection system, damped oscillating wave state detection system
| Item | Technical index |
| Power supply | 220VAC±10%, 50Hz |
| Maximum output voltage (peak) | 30kV |
| Oscillation frequency range | 20Hz ~ 500Hz |
| Test cable length range | 200m ~ 20km |
| High voltage charging current | 8mA |
| High voltage switch | Trigger mode: Laser triggers high voltage switch |
| High voltage switch characteristic | Conduction time: 1μs |
| Switching resistance: less than 1Ω | |
| Optical fiber communication | |
| Measuring range of local discharge | 1pC ~ 100nC |
| Local discharge level detection and bandwidth | In line with the International Electrotechnical Commission IEC60270 standard |
| Office release location bandwidth | 150kHz ~ 45MHz automatic adjustment |
| Local discharge positioning measurement accuracy | Cable length 1% (minimum resolution 2m) |
| Dielectric loss measurement range | 0.1% ~ 10% |
| Real-time sampling rate of office release | 100MHz |
| Local sampling storage depth | 32MB (can record 300ms data length) |
| Control mode | Wireless control, wired control |
| Local discharge calibration mode | Automatic/manual |
| Damping oscillatory wave realization | Automatic voltage boost, automatic generation of damped oscillation wave voltage |
| Software information recording interface | (1) | Record the time and date |
| (2) | Basic information of registered users: test personnel | |
| (3) | Basic information of the test cable: including the name of the test cable station, cable model, length, joint, operation history, etc | |
| Software main function | (1) | All Chinese operation interface |
| (2) | Support one-key compression, automatic calibration, one-key analysis | |
| (3) | Convenient and intuitive setting of voltage amplitude, control automatic boost and oscillation wave generation | |
| (4) | Multi-terminal WEB browsing cloud test data function (network support required) | |
| (5) | Automatic synchronization of basic data parameters (network support required) | |
| (6) | Automatic display of oscillating wave voltage amplitude, oscillation frequency and sampling time width | |
| (7) | Automatic display of dielectric loss value | |
| (8) | Automatic display of maximum volume | |
| (9) | Store oscillating waveform and local release waveform | |
| (10) | The local release waveform can be amplified on site for initial positioning of the local release source point | |
| (11) | Automatic or manual analysis of detection data automatically generate office release location map, automatically generate statistical reports | |
| (12) | Automatic generation of office release statistical maps, such as Q-φ chart, N-φ chart, etc |
1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.
2. For more information about Wuhan UHV, please enter product center . Service email:info@hvtest.cc
Damped AC cable testing system applies a controlled damped oscillating voltage to a power cable for insulation assessment. After the cable is charged to the selected test voltage, the system initiates an oscillatory discharge process that produces a voltage waveform with a gradually decreasing amplitude.
The resulting voltage waveform can be used as part of a cable insulation diagnostic procedure. When combined with partial discharge measurement, the system can help detect discharge activity associated with potential insulation defects. The recorded signals and test conditions provide information for further technical evaluation.
The UHV-505 Damping Oscillatory Wave State Detection System is designed to combine DAC voltage generation with partial discharge measurement and related diagnostic functions. The product specifications list a maximum output voltage of 30kV peak and an oscillation frequency range of 20Hz to 500Hz.
The appropriate test voltage and procedure depend on the cable type, rated voltage, insulation condition, cable length, and applicable testing requirements. Test results should be interpreted together with other available information, rather than used as the sole basis for determining cable condition.
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email: info@hvtest.cc
Skype: Tina Qiao
+8615172408058
