Cable fault tester (flasher) can be used to detect various types of power
Note:
Regarding product purchase, technical maintenance and other services, welcome to send email:
The cable fault tester is a new generation of portable cable designed and manufactured by our company according to user requirements and considered from the field.Fault test instrument. It adheres to our consistent high-tech, high-precision, high-quality purposes, to raise the level of cable testing to a new level.The whole cable fault tester consists of three parts: flashing, tracing and locator. Cable fault tester (flash meter) can be used to detect various types of electricity,The low resistance, high resistance, short circuit, open circuit, leakage fault and flashover fault of the cable can accurately detect the fault location and power of the underground cable.Cable length and cable buried path. It has the characteristics of accurate test, high intelligence, wide adaptability, stable performance, light weight and portability.
The instrument adopts English character system, high definition display and friendly interface. Cable tracking and fault location are determined by path meter, fixed point meter, T-type probe, A frame, earpiece, etc. This instrument is a special instrument for cable fault location test. It is suitable for test objects with metal conductors (pairs, Various cables for the sheath and shield). Its main function is the positioning test of the bad ground insulation, the detection of the cable path and the cable depth.
Product nickname： Cable fault meter, Power Cable Fault Teater, Street Light Cable Fault Teater, Cable fault finder, Cable fault finder, Portable cable fault location system, Cable fault flash meter, Geo Cable Fault Teater, Cable Trailer, Cable Fault Teater
| The longest testing distance | 15km (100km for the open-wire line) |
| Testing .dead zone | 1m |
| Resolution of reading | 1m |
| Power dissipation | 5VA |
| environment temperature | 0℃~＋40℃ |
| terminal temperature | －10℃~＋50℃ |
| relative humility | 20-90%RH |
| Dimension | 275×220×160mm3 |
| Weigh | 1.8kg |
| operation mode | Output - fixed frequency intermittent square wave signal |
| Output Power | Pomax≥100W |
| Output impedance | 1Ω－∞ |
| Output signal frequency | 16kHz |
| Output signal amplitude | 15V-340V |
| Pathfinder transmitter power supply | AC220V±10℅ |
| Rough measurement error | Less than 10% |
| Fixed-point error | <±10cm |
| Electromagnetic channel gain | >110dB (300,000 times) |
| Electromagnetic channel receiver sensitivity | <5μV |
| Sound channel audio amplifier gain | <120dB (1 million times when the signal-to-noise ratio is 4:1) |
| 50Hz Power frequency rejection | >40dB (100 times) |
| Power consumption | <120mA (0.7W) |
| Buried depth detection | >≦3m |
1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.
2. For more information about Wuhan UHV, please enter product center . Service email：qiao@hvtest.cc
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email： qiao@hvtest.cc
Skype： Tina Qiao
+8615172408058
