HuaTianLogo
Automatic Capacitance and Inductance Tester

HTDR-H Automatic Capacitance Bridge Tester

Measurement of high voltage shunt capacitor banks for reactive power compensation devices

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

In order to reduce reactive power loss in power system, shunt capacitor banks are usually used to improve power factor. In practical application, the accident rate of capacitor compensation device is relatively high, which is determined by the characteristics of the working state of capacitor device. Therefore, it is very important to check the capacitor device regularly and find capacitor defects early to avoid the expansion of the fault.

Capacitors in the capacitor bank are all in parallel in the field, so the leads need to be removed when workers measure with a general capacitance meter, which is a heavy workload and easy to cause wiring errors. The newly developed capacitor and inductance tester of our company can measure a single capacitor of a group of parallel capacitors without disconnecting the wire, and can also measure the inductance and current. The wiring is convenient, the operation is simple, which reduce the workload of the maintenance personnel and greatly improves the testing efficiency of the site and provides security for the normal operation of the power grid.

Product nickname:power capacitance tester, power capacitor tester, capacitance bridge, digital automatic capacitance and inductance tester, automatic capacitance Inductance teste, distribution grid automatic capacitance and inductance tester, automatic capacitance tester, automatic capacity tester, automatic capacity measuring instrument, automatic capacitance and inductance tester

Product Parameters

Technical Parameters

Measurement range Capacitance:2uF~2000uF
Inductance:5mH~5000mH
Current:20mA~2000mA
Measurement accuracy Capacitance:± (1% reading + 2 words)
Inductance:± (1% reading + 5 words)
Current:± (1% reading + 2 words)
Dimensions 345mm×295mm×175mm
Instrument weight 7kg

Working condition

Ambient temperature -10℃~50℃
Ambient humidity ≤85%RH
Working power supply AC220V±10%
Power frequency 50±1Hz
Note:

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Huatian products, please enter Product center . Service email:qiao@hvtest.cc

Product Characteristics

Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester

Product Picture

Product attachment diagram

Product detail map

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

Recommended Products