Product Picture
Product attachment diagram
Application Scenarios
-
1. Substation Commissioning: Used for acceptance testing of new circuit breakers after installation and before energization to verify all mechanical parameters meet specifications.
-
2. Routine Maintenance and Preventive Testing: Integrated into maintenance programs for periodic testing (e.g., annually) to track changes in timing, travel, and velocity, helping to predict and prevent failures.
-
3. Fault Diagnosis and Troubleshooting: Deployed when a circuit breaker has failed to operate correctly or after a fault event. It helps identify issues like mechanism wear, contact erosion, damping problems, or control circuit faults.
-
4. Circuit Breaker Manufacturing: Used by manufacturers for final quality control and type testing to ensure production units meet design standards.
-
5. Repair and Overhaul: Employed after major repairs or overhauls to verify that the circuit breaker has been correctly reassembled and adjusted.
FAQ
- 1、What is a circuit breaker analyzer and what does it test?
Circuit Breaker Analyzer, also known as a dynamic contact resistance tester or mechanical characteristics tester, is an instrument used to measure the mechanical operating parameters of a high-voltage circuit breaker. It primarily tests timing, travel and velocity, and coil current. These parameters are critical for assessing the mechanical condition and performance of the breaker. - 2、What types of circuit breakers can the UHV-408 Circuit Breaker Analyzer test?
The UHV-408 Circuit Breaker Analyzer is designed to test a wide variety of circuit breakers, including SF6, GIS, vacuum, oil, and vacuum contactors, produced both domestically and internationally. It can also test special circuit breakers used in railway applications. - 3、How many contacts can the analyzer measure simultaneously?
It can measure up to 12 metal contact fractures simultaneously, which are typically configured as 6 main contacts and 6 auxiliary (resistor) contacts. This allows for comprehensive timing analysis of multi-break circuit breakers in a single operation. - 4、How is the test data stored and managed?
The instrument has internal memory for storing up to 100 test records, complete with a time and date stamp. Data can be exported to a USB drive for transfer to a PC. The PC software allows for further analysis, storage, and report generation. The built-in thermal printer also allows for immediate, on-site printing of results and waveforms. - 5、What makes this analyzer suitable for use in high-voltage substations?
The UHV-408 Circuit Breaker Analyzer is designed with internal anti-interference circuits that allow it to operate reliably in the electrically noisy environment of a 500kV substation. This ensures accurate measurements even when high-voltage equipment is energized nearby.
Product Certificate
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
Recommended Products
-
email: info@hvtest.cc
-
Skype: Tina Qiao
+8615172408058 -

-






