Microcomputer three - phase single - chip microcomputer relay protection test equipment
Note: Regarding product purchase, technical maintenance and other services, welcome to send email:
Microcomputer relay protection tester is in reference to issued by the ministry of the type of microcomputer relay protection test device technical conditions (discussion paper), on the basis of widely to listen to your users, summarizes the current domestic similar products strengths and weaknesses, full use of modern advanced microelectronics technology and the implementation of a new type of device miniaturization of microcomputer relay protection tester. Microcomputer relay protection tester with a large screen LCD display and flexible and convenient rotating mouse controller. Stand-alone operation has a strong function, can carry out most of the tests, connected to the computer operation has a more powerful operation function. Small size, high accuracy. Not only has the large tester superior performance, advanced function, but also has the small tester compact and flexible, easy to operate, high reliability, performance and cost. It is a good tool for the maintenance workers.
Product names:microcomputer relay protection tester, microcomputer relay protection tester, three phase relay protection tester, relay protection tester, three phase relay protection tester, three phase relay protection calibrator, relay protection calibrator, three phase relay protection calibrator, relay protection tester
Output precision | 0.2 class |
Phase current output (effective value) | 0~40A |
Triple current output (effective value) | 0~120A |
Long-term permissible operating value of phase current (effective value) |
10A |
Maximum output power of phase current | 450VA |
Output power at maximum output of three- phase parallel current |
900VA |
Three parallel current maximum output allowable operating time |
10s |
Frequency range (fundamental wave) | 0~ 1000Hz (online) 0~300Hz (stand-alone) |
Harmonic frequency | 0~ 20 times (online) 0~6 times (stand-alone) |
Output precision | 0.5 class |
Output current | 0 ~ ±10A/ phase, 0 ~ ±30A/ terad |
Maximum output load voltage | 20V |
Output precision | 0.2 class |
Phase voltage output (effective value) | 0~120V |
Line voltage output (effective value) | 0~240V |
Phase voltage/line voltage output power | 80VA/100VA |
Frequency range (fundamental wave) | 0~ 1000Hz (online) 0~300Hz (stand-alone) |
Harmonic frequency | 0~ 20 times (online) 0~6 times (stand-alone) |
Output precision | 0.5 class |
Phase voltage output amplitude | 0~±160V |
Line voltage output amplitude | 0~±320V |
Phase voltage/line voltage output power | 70VA/140VA |
three-phase | note | |
Switching input | 8 road | empty contact: 1 ~ 20mA, 24V |
potential contact access:"0":0~ +6V; "1":+11 V~ +250V | ||
Switching output | 4 pair | DC:220V/0.2A;AC:220V/0.5A |
Time measurement | measurement range is 0.1ms ~ 9999s | measurement accuracy is 0.1ms |
1.The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice.In case of misappropriation or copying, legal liability will be investigated.
2.For more information aboutWuhan UHV, please enter Product center . Service email:info@hvtest.cc
1. Standard 4-phase voltage and 3-phase current output, with 4-phase voltage and 3-phase current output, can conveniently carry out various combination outputs for various types of protection tests. Single-phase voltage can output up to 120V, single-phase current up to 40A (10 seconds), current three and can output up to 120A, the fourth phase voltage Ux is a multi-function voltage item, can be set as 4 kinds of 3U0 or check the same period voltage, or a certain voltage value of the case output.
2. Single machine is easy to operate. The single machine is operated by a convenient and flexible rotating mouse through a large LCD screen, all of which are displayed in Chinese. It can complete most of the field test verification work, can verify all kinds of relays and microcomputer protection, and can simulate all kinds of complex transient, permanent and transformational faults for the whole group of tests. Boot can be used, easy to operate.
3. Double operation mode, connected to the computer operation, through the Windows platform of the full set of Chinese operating software, can carry out a variety of large complex and higher degree of automation verification work, can be easily tested and scanned a variety of protection fixed value, can be real-time storage test data, display vector diagram, draw fault waveform, online print report, etc.
4. Software is so powerful that can complete all kinds of high degree of automation of large complex check work, such as three phase differential test, auxiliary power fast cutting, prepared from the cast test, line protection inspection period reclosing, etc., can easily test and scanning, protection setting various fault playback, real-time storage test data, show that the vector diagram, online printing report, etc.
5. Switch quantity contact is rich, three - phase for 7 contact input and 2 pairs of empty contact output. The input contacts are compatible with 0 ~ 250V potential contacts and can be identified automatically. Input and output contacts can be expanded according to user needs.
6. Large screen LCD display, microcomputer relay protection tester adopts 320×240 lattice large screen high-resolution graphics LCD display, all the operation process are set on the display screen, the operation interface and test results are displayed in Chinese, the display is intuitive and clear.
7. Self-protection, adopt reasonable design of heat dissipation structure, and have a variety of reliable and perfect protection measures and power soft start, and a certain fault self-diagnosis and locking function.
8. With an independent dedicated dc power output, the device is equipped with one 110V and 220V dedicated dc power output.
9. High cost performance, belongs to the cross - professional joint design products, integrated multi - professional advanced scientific and technological achievements. Both large tester performance, and small tester price, with a high performance ratio.
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email: info@hvtest.cc
Skype: Tina Qiao
+8615172408058