DC resistance of transformer is the, installation, handover test and preventive test by electric power department
Note: Regarding product purchase, technical maintenance and other services, welcome to send email:
This fast DC resistance tester (hereinafter referred to as DC resistance tester) is the product of the latest generation for measuring the DC resistance of transformer and is optimally designed for measuring the DC resistance of the three-phase winding of the large-capacity transformer. It can measure the DC resistance of the three-phase winding at the same time. In case of the on-load voltage regulating transformer, it is not required to discharge but to directly adjust the tapping switch. The measurement time is one third of the traditional single-phase measurement, greatly shortening the working time and labor intensity. As the DC resistor tester is provided with large-screen LCD and the graphical interfaces in Chinese, the operation is visual, clear and easy. Besides, it is provided with panel type printer and large-capacity non-volatile memory, so the measurement results can be stored and printed out easily. With good stability in data testing, speediness and perfect repeatability, it is the best choice for the on-site measurement of DC resistance of transformer.
product names:Transformer dc resistance test in three channels、Dc resistance tachometer、 Transformer dc resistance test instrument、 Transformer winding dc resistance test instrument、 Transformer direct resistance speed meter、 Transformer direct resistance quick test instrument、Inductive load Dc resistance tachometer、Inductive load dc resistance rapid test instrument、Inductive load dc resistance test instrument,Transformer dc resistance test for three circuits、Three loop transformertest、Three channel dc resistance tester
Testing current | Single phase:1A 5A 10A 20A | |
Three phase:1A 5A 10A | ||
Measurement scope | Single phase | |
1A 10mΩ ~ 20Ω | ||
5A 1mΩ ~ 4Ω | ||
10A 1mΩ ~ 2Ω | ||
20A 1mΩ ~ 1Ω | ||
Three phase | ||
1A 10mΩ ~ 6Ω (each phase) | ||
5A 1mΩ ~ 1Ω (each phase) | ||
10A 1mΩ ~ 0.6Ω (each phase) | ||
Measurement accuracy | ± (0.2%Full span ± 2 words ) | |
Maximum resolution | 0.1μΩ | |
Data storage capacity | 150 groups | |
Power supply | AC 220V±22V,50Hz±2Hz | |
Working environment | Ambient temperature: 0°~40° Relative humidity :≤80% |
1.The appearance of the product shall be subject to the actual product,Technical parameters with model if there are any changes,without notice.In case of misappropriation or copying, legal liability will be investigated.
2. For more information about Wuhan UHV, please enter product center . Service email:info@hvtest.cc
1、The DC resistance of the three-phase winding of the transformer can be tested simultaneously.
2、the on-load voltage regulator transformer can be directly adjusted without discharge, the measurement time is one-third of the traditional single-phase measurement, which can greatly shorten the working time and labor intensity.
3、the direct resistance meter uses a large screen LCD display, all Chinese graphical interface, clear and intuitive, the operation is very simple.
4、and equipped with a panel printer and large capacity non-volatile memory, you can easily store and print measurement results.
5、the test data is stable, fast, good repeatability, is the best choice for on-site measurement of transformer DC resistance.
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email: info@hvtest.cc
Skype: Tina Qiao
+8615172408058