HuaTianLogo
  • info@hvtest.cc
    • Motor test bench

    UHV-316 Motor Test Bench

    Power supply transformer no-load and load characteristics test, frequency doubling-induction test and power frequency voltage withstand test on the tested transformer

    Manual Pictures Video

    Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

    Product Introduction

    The motor test bench conforms to GB/T755-2019, GB/T14711-2013, GB/25442-2010 and other relevant national standards.

    According to the technical requirements and Party A's actual test motor type, capacity, test project, this test bench is designed for Party A non-standard, in line with the standard use requirements.

    The test bench is designed based on the principles of safety, reliability, economy, practicality, ease of operation and scalability, and adopts advanced technology to complete more complicated test functions.

    The test bench can complete the test function of high and low voltage three-phase asynchronous motor and DC motor.

    product names：motor comprehensive test bench, motor test bench, DC motor comprehensive test bench, motor comprehensive test system, AC motor comprehensive test bench

    Product Parameters

    Equipment power supply

    Power supply voltage 460V Frequency 60Hz
    Phase number 3 Phase Rated capacity Not less than 500KVA

    Test capacity

    Serial number Motor type Rated voltage Test frequency No-load test Remark
    1 Low voltage three-phase asynchronous motor 230V-660V Sine wave 50Hz, 60Hz 3kW-1250kW The high-power motor adopts low-voltage test, and the motor rotates at full speed
    2 High voltage three-phase asynchronous motor 3KV-13.2KV Sine wave 50Hz, 60Hz 50kW-8000kW
    3 DC motor DC800V or less DC 100kW-800kW

    The main test parameters and accuracy of the test bench

    Alternating current voltage
    Low pressure measurement 10-700Vac Precision ±0.2%FS
    Alternating current
    Low pressure measurement 1-1200A Precision ±0.2%FS
    High voltage measurement 1-500A Precision ±0.2%FS
    DC measurement 1-500A Precision ±0.2%FS
    DC resistance 0.005-2000Ω Precision ±0.2%FS
    Temperature -20-200℃ Precision ±1℃
    Frequency 45-65Hz Precision ±0.1Hz
    Note:

    1.The appearance of the product shall be subject to the actual product，Technical parameters with model if there are any changes，without notice.In case of misappropriation or copying, legal liability will be investigated.

    2. For more information about Wuhan UHV, please enter product center . Service email：info@hvtest.cc

    Product Characteristics

    Motor Test Bench Motor Test Bench Motor Test Bench Motor Test Bench Motor Test Bench Motor Test Bench Motor Test Bench

    Product Video

    Product Picture

    Product attachment drawing

    Overall diagram

    Motor test bench

    Intermediate frequency generator set

    Control cabinet

    High-voltage protective resistor

    Tachometer

    Vibrometer

    Product details

    Overall diagram

    Main Control Console

    Side View of Main Control Console

    Control Buttons

    Power Analyzer

    Screen

    Voltage Switch

    High-voltage Incoming Line Cabinet

    Current & Voltage Meter

    Cabinet Lighting Switch

    Motor Terminal Box

    Transformer

    Gas-filled Test Transformer

    Coupling Capacitor&Voltage Divider

    Large/Small Voltage Regulator

    Variable-frequency Power Supply

    Measurement Cabinet

    Single-phase Low-pass Filter Cabinet

    Partial Discharge Analyzer

    Product Certificate

    Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

    Recommended Products