UHV-316 Motor Test Bench

Power supply transformer no-load and load characteristics test, frequency doubling-induction test and power frequency voltage withstand test on the tested transformer

Meet the power transformer test below 2500kVA
Large screen backlit LCD display

Manual Pictures Video

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

The motor test bench conforms to GB/T755-2019, GB/T14711-2013, GB/25442-2010 and other relevant national standards.

According to the technical requirements and Party A's actual test motor type, capacity, test project, this test bench is designed for Party A non-standard, in line with the standard use requirements.

The test bench is designed based on the principles of safety, reliability, economy, practicality, ease of operation and scalability, and adopts advanced technology to complete more complicated test functions.

The test bench can complete the test function of high and low voltage three-phase asynchronous motor and DC motor.

product names：motor comprehensive test bench, motor test bench, DC motor comprehensive test bench, motor comprehensive test system, AC motor comprehensive test bench

Product Parameters

Equipment power supply

Power supply voltage	460V	Frequency	60Hz
Phase number	3 Phase	Rated capacity	Not less than 500KVA

Test capacity

Serial number	Motor type	Rated voltage	Test frequency	No-load test	Remark
1	Low voltage three-phase asynchronous motor	230V-660V	Sine wave 50Hz, 60Hz	3kW-1250kW	The high-power motor adopts low-voltage test, and the motor rotates at full speed
2	High voltage three-phase asynchronous motor	3KV-13.2KV	Sine wave 50Hz, 60Hz	50kW-8000kW
3	DC motor	DC800V or less	DC	100kW-800kW

The main test parameters and accuracy of the test bench

Alternating current voltage
Low pressure measurement	10-700Vac	Precision	±0.2%FS
Alternating current
Low pressure measurement	1-1200A	Precision	±0.2%FS
High voltage measurement	1-500A	Precision	±0.2%FS
DC measurement	1-500A	Precision	±0.2%FS
DC resistance	0.005-2000Ω	Precision	±0.2%FS
Temperature	-20-200℃	Precision	±1℃
Frequency	45-65Hz	Precision	±0.1Hz

Note:

1.The appearance of the product shall be subject to the actual product，Technical parameters with model if there are any changes，without notice.In case of misappropriation or copying, legal liability will be investigated.

2. For more information about Wuhan UHV, please enter product center . Service email：info@hvtest.cc

Product Characteristics

1、the motor test bench to reliability, safety, economy, practicality, operability, maintainability as the design principle, while taking into account the advanced nature.
2、The measurement and control system of the testing equipment adopts industrial control computer +PLC control + digital display measuring instrument.
3、the test system all the bench, electric control cabinet, box surface spray treatment, all marks are clear and not easy to fall off.
4、All the equipment and installation materials in the testing equipment are new parts, and the measurement units of the parts and meters of the equipment and all the drawings and data adopt the international unit (SI) standard.

Product Picture

Product attachment drawing

Overall diagram

Motor test bench

Intermediate frequency generator set

Control cabinet

High-voltage protective resistor

Tachometer

Vibrometer

Product details

Overall diagram

Main Control Console

Side View of Main Control Console

Control Buttons

Power Analyzer

Screen

Voltage Switch

High-voltage Incoming Line Cabinet

Current & Voltage Meter

Cabinet Lighting Switch

Motor Terminal Box

Transformer

Gas-filled Test Transformer

Coupling Capacitor&Voltage Divider

Large/Small Voltage Regulator

Variable-frequency Power Supply

Measurement Cabinet

Single-phase Low-pass Filter Cabinet

Partial Discharge Analyzer

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.