HuaTianLogo
ETCR2000 Ground Tester

ETCR2000 Ground Tester

Widely used in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment, such as grounding resistance measurement, circuit resistance measurement.

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

ETCR2000 Ground Tester is a major breakthrough in the traditional grounding resistance measurement technology, which is widely used in the grounding resistance measurement of electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

The ETCR2000 Ground Tester does not need to disconnect the grounding lead and auxiliary electrode when measuring the loaned Ground system, which is safe, fast and easy to use.

ETCR2000 Ground Tester can measure the Ground fault that cannot be measured by traditional methods, and it can be applied to the situation that cannot be measured by traditional methods, because ETCR2000 Ground Tester measures the comprehensive value of the resistance of grounding body and the resistance of grounding lead.

In addition, the C - type clamp ground resistance meter can also measure the leakage current and neutral current of the ground system.

Product nickname:Single jaw grounding resistance tester, nipper plier type grounding resistance tester, grounding resistance meter, pliers grounding resistance meter, clip-on grounding resistance meter, clip-on grounding resistance meter, grounding resistance, surface, grounding resistance tester, grounding resistance tester, grounding resistance measuring instrument, clamp type digital grounding resistance tester, grounding resistance tester, pincer pliers type grounding resistance measuring instrument

Product Parameters

Technical parameters

power supply 6VDC(4 no.5 alkaline dry batteries)
operating temperature -10℃-55℃
relative humidity 10%-90%
LCD 4-digit LCD digital display, length and width 47×28.5mm
clamp table quality (including battery) 1130g
clamp table size length 275mm, width 85mm, thickness 56mm
protection level double insulation
structure characteristics clamping mode
range shift Automatic
external magnetic field <40A/m
External electric field <1V/m
single measurement time 1 SEC
resistance measurement frequency >1KHz
highest resolution resistance measurement 0.001Ω
Resistance measurement range 0.01-1000Ω
* current measurement range 0-30A(type C)
measured current frequency 50/60Hz
stored measurement data 99units
setting range of resistance alarm critical value 1-199Ω
* setting range of current alarm critical value 1-499mA(type C)
Note:

1.The appearance of the product shall be subject to the actual product,Technical parameters with model if there are any changes,without notice。In case of misappropriation or copying, legal liability will be investigated.

2. For more information about huatian products, please enter product center 。 Service email:sales@hvtest.cc

Product Characteristics Product Characteristics

ETCR2000 Ground Tester ETCR2000 Ground Tester ETCR2000 Ground Tester ETCR2000 Ground Tester

Product Video

Product Picture

Product attachment pictures

Product details

product production figure

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T28001-2011 occupational health and safety management system requirements.

Recommended Products