HuaTianLogo
  • info@hvtest.cc
    • HEY-H HRHEA

    HEY-H CT/PT Calibrator

    Intelligent instrument calibrator for PT CT error and impedance admittance test

    Manual Pictures Video

    stake： About product purchase、Technical maintenance and other services，Send welcome email：

    product brief introduction Product Introduction

    Intelligent instrument calibrator for PT CT error and impedance admittance test.It meets the requirements of jjg313-94 current transformer verification regulation and jjg314-94 voltage transformer verification regulation.

    Product nickname：transformer calibrator、Transformer current calibration instrument、Automatic transformer calibrator、Automatic current transformer calibrator、Automatic voltage transformer tester、HYHGX、Current transformer field calibrator、Voltage transformer field calibrator

    Product Parameter Product Parameters

    technical parameters

    Equipment operating environment temperature：5℃～40℃ relative humidity：<80%(25℃时)
    altitude：<2500m
    mains frequency：50Hz±0.5Hz mains input：220V±5V
    range of measurement cophase component(%)：0.0001～200.0 distinguishability：0.0001
    orthogonal component(part)：0.001～700.0 distinguishability：0.001
    impedance(Ω)：0.0001～20.0 distinguishability：0.0001
    admittance(ms)：0.0001～20.0 distinguishability：0.0001
    intrinsic error cophase component ΔX=±(X×2%＋Y×2%)±Dx(Level 1 is optional)
    orthogonal component ΔY=±(X×2%＋Y×2%)±Dy(Level 1 is optional)
    "X"、"Y"——Display value of instrument
    "Dx,Dy"——Display value of instrument
    Dx=2，Dy=5
    dial indicator PETS2(Level 1 is optional)
    working range electricity (1%～149%)In (In =5A)
    (5%～149%)In (In =1A)
    voltage (5%～149%)Un (Un =100V，150V，100V/)
    (5%～149%)Un (Un =100V/3)
    workload electricity TO to TX＜0.12Ω cosΦ=1
    voltage a to x＜0.25VA (100V)
    Polarity error indication When the operating current (voltage) reaches more than 5% of the rated current (voltage) and the error exceeds 180%, there should be polarity indication.
    Note: if it is more than 10% of the rated operating current (voltage), there is still no proper polarity indication, indicating a fault. Please do not increase the current (voltage) to avoid burning out the instrument.
    Variable ratio error indication When the operating current (voltage) reaches more than 5% of the rated current (voltage) and the error exceeds 30% but is less than 180%, the error indication of variable ratio should be given.
    Insulation and voltage test and

    instructions

    		 terminalTX()Terminal is same
    The power socket can withstand the housing1.5kV，1minwithstand voltage
    stake：

    1.The appearance of the product shall be subject to the actual product，If there are any changes in technical parameters and models，without prior notice.If there is theft or copying，Legal responsibility will be pursued.

    2.For more information aboutWuhan UHV, please enter product center . Service email：info@hvtest.cc

    product features Product Characteristics

    Product Picture

    Product attachment drawing

    HEY-HHRHEA

    Instrument host

     HEY-HAppearance of intelligent transformer calibrator

    appearance

     HEY-H Intelligent transformer calibrator panel

    RS232 cable

     HEY-HIntelligent transformer calibrator power switch

    Ground wire

     HEY-HIntelligent transformer calibrator wiring hole

    Test line

     HEY-HIntelligent transformer calibrator RS232 interface

    Test line

     HEY-HIntelligent transformer calibrator key area

    Test line

    product detail drawing

    HTGYSeries of automatic power frequency voltage control box

    Instrument main engine

     HTGYSeries of automatic power frequency voltage control box front

    Display screen

     HTGYSeries of automatic power frequency voltage control box side

    key

     HTGYSeries of automatic power frequency voltage control panel

    Power switch

     HTGYSeries of automatic power frequency voltage control box display screen

    Wiring hole

     HTGYSeries of automatic power frequency voltage control box terminal posts

    Ground port

     HTGYSeries of automatic power frequency voltage control box terminal posts

    Wiring hole

     HTGYSeries of automatic power frequency voltage control box terminal posts

    Connection point

     HTGYSeries automatic power frequency voltage control box status indicator light

    RS232 interface

     HTGYSeries of automatic power frequency voltage control box printers

    printer

    Product Certificate

    Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

    Recommended Products