Automatic Capacitance and Inductance Tester

HTRG-H Automatic Capacitance and Inductance Tester

It is mainly used to measure the capacitance value and total capacitance value of each phase of the compensation capacitor, the inductance value, the resistive component of the test object, the dielectric loss angle, the loss factor, the reactive power and the active power.

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

With the development of China's electric power industry, the capacitor compensation device has been unprecedentedly developed, but with it, the capacitor accident rate has risen sharply, and there have been serious group injury accidents. In order to prevent the occurrence of parallel capacitor accidents and ensure the safe and reliable operation of the power grid, State Grid Corporation has formulated the "Measures for Preventing High Voltage Shunt Capacitor Accidents". It is clearly stated that "the measurement of the capacitance of a single capacitor of a capacitor bank should be carried out on a regular basis. It is recommended to use a measurement method that does not remove the connecting wire to avoid the failure of the casing to leak due to the force of the casing caused by the disassembly and assembly of the connecting wire".

Automatic Capacitance and Inductance Tester is designed for the problems in the measurement of high voltage shunt capacitor banks in substation sites, and refers to GB3983.2-1989 "High Voltage Shunt Capacitors", DL/T840-2003 "Technical Conditions for Use of High Voltage Shunt Capacitors" and JB5346 -1998 "Series reactor" and other national standards and specially developed, mainly to measure the high voltage shunt capacitor bank and reactor of reactive power compensation device.

Automatic Capacitance and Inductance Tester adopts a new generation of high-speed hybrid microprocessor, which is highly integrated, synchronously collects the voltage signal and current signal of the test object, and automatically calculates the capacitance value, inductance value and reactive power value. On-site measurement of capacitors eliminates the need to remove the connecting lines, simplifying the test process, effectively improving work efficiency and avoiding damage to power equipment. After the test, the capacity of each phase capacitor and other parameters are automatically calculated, and it is easy to discriminate the quality change of the capacitor and the connection conductor failure between devices. At the same time, the Automatic Capacitance and Inductance Tester also features data storage and USB communication, eliminating the need to copy data on-site and ensuring complete measurement data.

Product nickname: Automatic Capacitance and Inductance Tester, referred to as Automatic Capacitance and Inductance Tester, Automatic Capacitance and Inductance Tester. English name: Automatic Capacitance Inductance Tester or Capacitance Inductance Tester.

Product Parameters

Technical Parameters

Capacitance Measuring range and accuracy Capacity range:0.1uF~3300uF
Accuracy: ± (reading × 1% + 0.005uF)
Inductance range and accuracy Inductance range:100μH~50H
Accuracy: ± reading × 2%
Power supply and test power supply Instrument power supply: AC 220V ± 10%, 50Hz
Output voltage (open circuit): AC 23V ± 10%, 50Hz (capacitance); AC 3V ± 20%, 50Hz (inductance)
Maximum output current:20A
Output short circuit protection: automatic
Working conditions, dimensions and instrument weight Ambient temperature: -10 ° C ~ +40 ° C ; relative humidity: ≤90%
Host volume: 400 × 290 × 175mm (length × width × height);quality:9.5kg
Accessory box volume: 340 × 260 × 135mm (length × width × height);quality:3.6kg

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Huatian products, please enter Product center 。 Service

product features Product Characteristics

Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester Automatic Capacitance and Inductance Tester

Product Video

Product Picture

Product attachment diagram

Product detail map

Production process diagram

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T28001-2011 occupational health and safety management system requirements.

Recommended Products