HuaTianLogo
High Precision Micro Ohmmeter

HTHL-100P High Precision Micro Ohmmeter

Suitable for measurement of loop resistance of switch control equipment

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

At present, conventional QJ44 type double-arm DC bridges are commonly used in power systems to measure contact resistance, and the test current of such bridges is only mA level, and it is difficult to find defects in reducing the cross-sectional area of the loop conductor. When measuring the contact resistance of the high-voltage switch conductive loop, the measured value is several times larger due to the influence of the oil film and the oxide layer between the contacts, and the contact resistance value cannot be truly reflected. To this end, the Ministry of Power standard DL/T845.4-2004 "General technical requirements for resistance measuring devices: loop resistance tester" and the new version of the verification procedures JJG1052-2009 "loop resistance tester, straight resistance test procedures" made measurement (isolated The measuring current of the contact resistance of switches, circuit breakers, etc. is not less than DC 100A, and the minimum current maintenance time is not less than 60S, ensuring accurate test results.

The High Precision Micro Ohmmeter operator panel is ergonomically designed to meet operational habits and uses high frequency switching power supplies and digital circuit technology for the measurement of loop resistance in switch control equipment. The test current is DC 100A recommended by the national standard. The loop resistance can be directly measured under the condition of DC 100A. The test result is displayed by large-screen LCD LCD, and has functions of data storage, output printing, time setting, etc., and 50A gear position for users to choose; custom test time, maximum The set time is 599S, which is much larger than the standard 60S. It is a very stable contact resistance tester with a resolution of 0.01μΩ in China. The performance exceeds the imported high current micro-ohmmeter. It meets the requirements of on-site high-voltage switch maintenance and high-voltage switch factory loop resistance test in electric power and power supply departments.

Product nickname:Contact resistance tester,Switching loop resistance tester,Contact loop resistance tester,Contact (loop) resistance tester,High Precision Micro Ohmmeter

Product Parameters

Technical Parameters

Measuring range 0~2999.9μΩ
Resolution 0~99.99,0.01μΩ ; 100.0~2999.9,0.1μΩ
Test current DC50A, 100A two-speed fixed output
measurement accuracy ±(0.5% rd+2d)
Continuous working time 5s~599s
Display method Large screen Chinese LCD display
communication mode U disk dump
Working power AC220V±10% 50Hz
Total power 600W
Maximum storage record 200
working environment temperature-10℃~40℃,humidity:≤80%RH
Dimensions 360×300×250 mm3
Weight 8kg(No attachments)
Note:

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Huatian products, please enter Product center . Service email:sales@hvtest.cc

Product Characteristics

High Precision Micro Ohmmeter High Precision Micro Ohmmeter High Precision Micro Ohmmeter High Precision Micro Ohmmeter

Product Video

Product Picture

Product attachment diagram

Product detail map

Production process diagram

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T28001-2011 occupational health and safety management system requirements.

Recommended Products