HuaTianLogo
Transformer on-load tap switch tester

HTBYC-3000 Transformer On-Load Tap-Changer Tester

It is mainly used for measuring the transition waveform, transition time, transient resistance of transformer on-load tap changer, three-phase synchronism, etc

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

The on-load tap changer is the only moving part connected with the transformer circuit, so more and more attention has been paid to the detection of the on-load tap changer.In the electrical equipment handover and preventive test regulations, it is required to check the action sequence of on-load tap changer, measure switching time, etc.This device is mainly used for measuring the transition waveform, transition time, transient resistance of transformer on-load tap changer, three-phase synchronism, etc.

product names:On - load tap - changer tester, transformer on - load tap - changer tester, transformer on - load switch tester

Product Parameters

Technical parameters

The output current 1.0A、0.5A
Measuring range Transition

resistance

0.5Ω~20Ω(1.0A)、0.5Ω~40Ω(0.5A)
Transition time 0~250ms
Accuracy of

measurement

Transition

resistance

±(5% reading +3 words)
Transition time ±(0.1% reading +3 characters)
The environment temperature -10℃~50℃
Environmental humidity ≤85%RH
Working power supply AC220V±10%
Power frequency 50±1Hz
storage U disk storage, local storage
Overall dimensions 345mm×295mm×175mm
Instrument weight 5kg
Note:

1.The appearance of the product shall be subject to the actual product,Technical parameters with model if there are any changes,without notice.In case of misappropriation or copying, legal liability will be investigated.

2. For more information about huatian products, please enter product center . Service email:qiao@hvtest.cc

Product Characteristics

Transformer on-load tap switch tester Transformer on-load tap switch tester Transformer on-load tap switch tester Transformer on-load tap switch tester Transformer on-load tap switch tester Transformer on-load tap switch tester

Product atlas Product Picture

Product attachment drawing

Product details

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

Recommended Products